| Mode | TSHDT1200 |
| Brand | TSAUTOP |
| Overall Dimensions | 120*60*85(cm) / 47.2*23.6*33.5(inch) |
| Water Capacity | 0.3ton |
| Machine Material | Thickness =1.5mm+-0.2mm 201#Stainless Steel |
| Heating Elements | 1Set, 208-240V, Single Phase, 50 HZ, 2000W |
| Water Recirculation System | 220V, Single Phase, 50 HZ, 100W |
| Certification | CE |
| Weight | 50kg |
TSAUTOP® ALL IN ONE MINI DIY HYDRO DIPPING TANK with CE certification is a simple, safe, useful, eco, and efficient hydro dipping machine. It can dip some small parts, such as DIY hydro dipping, hydro dipping helmet, hydrographic wheels, hydro dipping dashboard, hydro dipped interior, bow dipping, hydro dipping guns, hydro dipped phone case., DIY camo shoes, hydro dipped cups, hydro dipping shoes, etc. It can also be used for sample making and for novice training. It is very suitable for DIY dipping and beginners.
Efficient and Durable Design
TSAUTOP® all in one mini DIY hydro dipping tank adopts superb welding technology, and all welding parts are welded with 304 stainless steel welding wire. All welding marks are polished to ensure no leakage, and it is guaranteed to be leak-free for 5 years.
Partition Control Film
1.2m All in One DIY Hydro Dipping Tank is equipped with 2 wiper blades and 1 partition beam, which can wipe the film residue and divide the dipping area into several small areas to ensure that the film does not expand excessively.
Design Features
TSAUTOP® all in one mini DIY hydro dipping tank is designed as two parts dipping tank, washing, filtering, and heating tank, which ensures sufficient dipping area and fast heating. And equipped with a high-pressure sprayer for cleaning after dipping, it can also be equipped with a timer to heat the water.
Durable Material
TSAUTOP® all in one mini DIY hydro dipping tank is made of 1.5 mm thick 201 stainless steel, which is resistant to acid, alkali, salt and corrosion, ensuring the long life of the water transfer tank. Equipped with four removable feet for easy installation and fixing.
Efficient Heating System
TSAUTOP® all in one mini-hydro dipping tank s equipped with a high-quality 2000w heating element, which can be quickly heated within 30 minutes. The control box is equipped with 1 thermostat and temperature sensor each, which can set and monitor the temperature of the dipping tank and heating tank in real time.
Cleaning System
TSAUTOP® all in one mini DIY hydro dipping tank is equipped with a low-noise, high-current submersible pump to ensure that the film residue is washed away. The high-pressure nozzle at the outer end of the water tank can ensure that the water can be washed further.
Safe and Reliable
All working units of the integrated mini DIY water transfer tank are equipped with circuit breaker protection switches and emergency stop switches to ensure the safety of people and machines in emergency situations. All lines are concealed and covered with protective tubes to prevent leakage. All tanks are equipped with grounding wires to prevent electric shock.
Easy installation and operation
Each wire of the TSAUTOP® water transfer tank is numbered, and you can connect it according to the number. At the same time, a detailed manual will be attached when you receive the product for your convenience.
Water Transfer Printing (also known as hydrographic, immersion printing, camo dipping, hydro imaging and cubic printing) is a surface decorating process where elaborate graphics like wood grain, carbon fiber, camouflage, geometrical designs, etc… are applied to a 3-D product surface. Water Transfer Printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim. Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramic, and metal.
We like to let our product speak for itself. Some of world largest clients are automobile, Camera, electronic manufacturers who demand highest standards of quality and durability. Many parts we manufacture spend the majority of their lives in direct exposure. The clear coat we use is automotive grade, designed to withstand nature and time.
Top coating is an important part of the paint process. It assures optimal results for scratching firmness and longevity.
Use a high quality clear coat for the final finish. Whether its flat, matt or gloss the final coat should be durable enough to protect the part. Once the clear coat has dried you need to inspect it for defects. Most minor defects like orange peel look, or debris in the finish can be wet sanded and polished out at this stage. There are a few exceptions to this.
24-hours of training is conducted and historically it takes an additional period of two to three weeks to fine-tune the production line.
The essential components are: (1). The ink film with selected design/pattern. (2). Patented activator (3). A hand sanding device (4). A spray gun and air compressor (5). Primer, the selected base coat paint, and clear coat (6). The specifically designed water transfer printing system (7). A device or fixture to hold the item while it is being dipped (8). A constant water supply, drainage system, and an aerated room
It require tanks (manual / automatic ) , washing station , oven, spray booth to finish the process of Water Transfer Printing .
Yes, after transfer with PVA film on the decorated part, it needs Washing machines to clear over the subject.
Yes, it better dry by the oven, it is because dust will cover the subject while it dry by nature, the oven temperature should be around 50-70 degrees for the plastic material.
We recommend 0.8~1.3Ømm , not over 1.3Ømm , for activator it require high quality Precisely spray gun to work with it.
We recommend adding more water tanks to soak the decorated part for ink to more stable on the decorated part.
Normally ABS doesn’t require any base coat, but to match the design, it has to paint the base color to match the art.
Yes , when you did the Immersion Printing, it comes with a defect spot or the result unacceptable, it can remove by the activator or the chemicals, but the fast way is to repaint the base coat to cover it.
We have Marble, Wood, Camouflage, Animal, Waterdrop, Flower, Flag , Cartoon, Carbon fiber, Flame, Cloud, Geometric, Skull and other design film patterns for your choice.
We produce hydrographic film with width 50cm /60cm/ 80cm/ 100cm/ 130cm.
Our standard film width is 100cm, max width 130cm.
Yes, but shipping and importing activator is very difficult, because it is dangerous, explosive,flammable chemical liquid. However, we prefer offering your activator formula, you can make activator by yourself in your country.
Yes, you can send us AI/PDF design, original film sample, or work piece that has been printed.
We are a 20-year WTP experience manufacturer in China.
Yes, We can produce and offer films, activator, base primer, clear coat, other chemicals, WTP machine, a hydro dipping process, technology, and training.
You can select film picture models from our dropbox,
or we send you film booklet ( N.W 15KG, 13x18cm each pattern, more than 10000 patterns).
Outdoor for more than 8 years, indoor more than 20years.
Yes, we have lots of customers all over the world such as Europe, Middle-east, Asia, North America and South America, Africa, include Building materials company, cosmetic company, Electrical company, Toy company, Auto company, crafts company, Household goods company etc.
Yes,Our company have 2 water transfer printing production lines in Zhejiang Province and can transfer various articles .let your China supplier send dipping products to our factory, we finish all processing.
T/T, Western Union, Cash, Alipay, Paypal. B/L
Fully Automatic Hydro Dipping Machine With Tripod Dipping 
