Hydrographic Film PrinterTSAUTOP 1.6m/64″ Hydrographic film printer with Epson print head expand your printing capabilities until now, creating custom hydrographic patterns has been expensive and time-consuming.
TSAUTOP 1.6m/64″ Hydrographic film printer TSHP1600 changes everything. The first fully digital Hydrographic film printer on the market, the TSAUTOP 1.6m/64″ Digital Hydrographic film printer TSHP1600 prints black hydrographics film on-site and on-demand. With 98% less degassing and the ability to print and process custom art, pictures, photos and more, jobs can be completed in as little as 15 minutes.
The technological advancements of the TSAUTOP 1.6m/64″ Hydrographic film printer TSHP1600 set a new standard for the hydrographic industry’s customizations and turnaround times. Using a state-of-the-art print head that is able to print to blank hydrographics film and vehicle wrap material. hydrographic companies are able to not only break into new markets but also offer more to their existing customers. NEW MARKETS.
This print technology offers long-run production, research, development and prototyping opportunities, as well as generating samples for your customers before the costly investment of a gravure run. Your market expansion options are almost endless. Let’s cover bottles, motorcycle parts, ATV parts, helmets, snowmobile parts, lids, skateboards, gun stocks, antlers for mounts, tablet & phone cases, vases, home decor and more!
Hydrographics can cover rims, interior and other hard to reach areas. ALL-IN PROGRAM FOR PROCESSORS Creates vehicle wraps, indoor and outdoor signage, banners, decals and stickers, trade show graphics and much more, efficiently and quickly.
Our All-In Program includes the TSAUTOP 1.6m/64″ Hydrographic film printer TSHP1600, software, CMYK ink cartridges, and blank hydrographics film. Printer training and process training are available.
Contact us today to find out how the TSAUTOP 1.6m/64″ Hydrographic film printer TSHP1600 can work for you!
Dimensions: 106″ x 35″ x 50″ • Weight: 440 lbs. •
DPI: 1440 x 1440 to 360 x 360 •
Printable Width: 4″ to 64″ •
Take-Up System with 2″ or 3″ core •
Power Requirements: single phase 110v/220v 20A•
Operating Temperature: 65-90 •
Operating Humidity Range: 40-60% •
Print Speed: 4pass 16 m2/H, 6pass 12 m2/H,8pass 9 m2/H,
CMYK Ink Configuration Available in 440ml Cartridges •
Proprietary Ink Set •
HDI Hydrographic Film: 47.5″ wide •
RIP (Raster Image Processor) Software Included •
Print Process Training Available •
Hydrographic Dipping Process Training Available
HOW TO USE TSAUTOP 1.6M/64″ HYDROGRAPHIC FILM PRINTER TSHP1600
1.1 The power supply security
A 、 power ：Single Phase 50Hz 220V or 110V AC(±10%) 。Maximum power machine ：2200W ，print power 100W 。
B、 Only can use the printer in the label logotype of the power supply. according to different countries and regions, may choose 110 v or 110v ac power
C、 Will all of the devices connected to a properly grounded outlet, avoid the use of sockets and frequent switching between the on and off the equipment (e.g., duplicator, air conditioning system) in the same loop
D、 Avoid the use of controlled by the switch on the wall or automatic timer socket.
E、Make your computer system away from potential interference sources ，for example: the speaker or wireless phone stand.
F、 Do not use damaged or broken power cord
G、 If you use the additional power cord, bear in mind that the insertion of the additional power equipment total amperes do not exceed the rated amperage of the power supply, In addition, remember that the insertion of the all equipment on the wall to the total number of ampere don’t exceed the amperage rating of the wall outlet.
H、 Don’t try to repair his pictorial machine, encounter problems please timely for
pictorial machine maintenance and technical personnel
I、 For man and machine safety, please do good earthed, specific requirements have
installed staff informed
J.Can’tcharged printing line plug and pull the power cord, otherwise will cause the
damage of the main board.
1.2 Operation cautions
A、 Always turn off the power switch to using the pictorial machine (pictorial machine on
the right side of the rear power switch). In front of the machine power supply has
not been cut off, please don’t take photoelectrical source plug or unplug other
B、 Please do not put the machine tools or other items with the print platform or on flat,
so as not to slow to clean up before the machine’s operation cause unnecessary losses.
C、 Before handling the pictorial machine, please make sure you print the car has been
fixed in initial position。
D、When printing the picture, the paper machine(prevent become warped piece) must be used，in case of paper by the partial and blowing nozzle.
E、 Someone must watch when the machine work. (the machine must be operated by professional operators).
F、 Encoder a trip should be regularly checked to see if clean and damaged，if dirty should use a cotton swab dipped in alcohol to clean.
G、 guide should be regularly checked to see if clean; It is recommended to use 1 to 2 months to be above the guideway butter (or parts of lubricating oil, etc.), decrease the slider friction.
H、Regularly check the maintenance station cleaning job.
I、 Don’t let the nozzle left under the maintenance station exposed to the air for a long time. J、 Abnormal shutdown condition; Do not manually pull the car quickly, should let its boot
automatically back to the warehouse.
K、Regular maintenance of the machine, reducing dust, the ink on the influence of the machine
L、 Note: the machine must be connected to ground; When the dry air, static problem that not allow to ignore, when using some lamination and light medium, take electrostatic charge (especially when into the paperwork soon).Electrostatic charge can lead to the machine and the card security is damaged, will take the ground wire is the only way to electrostatic discharge. Because the static power
itself is a huge, so when charged the ink head operation, ensure that the hands have discharge (contact grounding metal body or wear in addition to electrostatic bracelet), otherwise easy to cause damage of the board and the nozzle.
1.3Location of the installation and use of environmental considerations
A、please make the pictorial machine in level, stability, and greater than the pictorial machine in the plane. If pictorial machine tilt or have a certain Angle, the normal work of the machine could not be performed
B、 to set aside enough space around the pictorial machine to ensure the normal ventilation of the pictorial machine.
C、 make the printing machine be placed in close to the wall outlet in order to easy to plug.
D、 avoid in the place of the drastic change of temperature and humidity, easy to use the pictorial machine. Avoid printer by direct sunlight, strong light or heat source.
E、 pictorial machine using temperature: 18 to 26 degrees Celsius; Humidity: 38% to 38%.To make the machine can run in the groove, please configure air conditioning and indoor temperature and humidity meter.
F、 the machine must be far away from the noise source.
1.4 The ink is put and precautions for use
A, Please put the ink bottle at the children can’t reach, don’t let the kids drink ink cartridges or contact.
B, if the ink sticks to the skin, please wash with soap and water. If the ink splashes the eyes, immediately rinse off with clear water.
C, don’t shake the ink bottle, so as not to cause the ink leaks.
D, ink bottle after using for a period of time (usually for two months), immediately take a thorough cleaning, and dry. Replace the ink bottle should pay attention to clean, to ensure the quality of printing. E, the ink should be placed cool storage, avoid direct sunlight.