- Display 16 Products per page
Fully Automatic Hydro Dip Machine
| Method: | Fully Automatic Hydro Dip Machine |
| Usage: | Water Transfer Printing, Hydro Dipping |
| Model Number | V6.0 |
| Voltage: | 220V and customize accept |
| Certification: | CE |
| Pump: | Stainless Steel Pump |
| Matherial: | Thickness =2.5mm+-0.2mm 201# Stainless Steel |
| Water Recirculation System: | Stainless Pump, 208-240V, Single Phase, 50 HZ, 750W |
| Dipping Arm Load-bearing: | Electric 200kg |
Fully Automatic Hydro Dip Machine
TSAUTOP Fully Automatic Hydro Dip Machine adopts fully automatic, intelligent, and efficient operation. It has six advanced systems, including Automatic Constant Temperature System, Automatic Activator Spray System, Automatic Film Laying System, Automatic Dipping Arm, Automatic Water Circle, and Automatic Filtering System. You can complete a dipping in three minutes, which is very suitable for small and medium-sized enterprises.
The Fully Automatic Hydro Dip Machine is made of stainless steel, which is corrosion-resistant and wear-resistant to ensure the durability of the equipment.
| Item NO. | TSHDTA3600 L*W*H | TSHDTA4100 L*W*H | TSHDTA4400 L*W*H |
| Machine Size | 360 * 130 * 90(cm) | 500 * 130 * 90(cm) | 440 * 130 * 90(cm) |
| Dipping Area Size | 260 * 110 * 70(cm) | 310 * 110 * 70(cm) | 330 * 110 * 70(cm) |
| Total output power | AC 380V 50/60HZ, 18.5KW, 370AMP | ||
| Machine Material | Thickness =2.5mm+-0.2mm 201#Stainless Steel | Thickness =2.5mm+-0.2mm 201#Stainless Steel | Thickness =2.5mm+-0.2mm 201#Stainless Steel |
| Dipping Arm Material | 4*8 2mm thickness aluminum alloy | 4*8 2mm thickness aluminum alloy | 4*8 2mm thickness aluminum alloy |
| Dipping Arm Load-bearing | Electric 80kg | Electric 150kg | |
| Dipping Arm Power | single /3 phases 220/380V 1500w servo motor | single /3 phases 220/380V 1500w servo motor | single /3 phases 220/380V 1500w servo motor |
| Continuous Flow System | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving | 130*50*30，Power single /3 phases 220/380V 400w servo motor for film release;750w for film machine moving |
| Automatic Spray System | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving | 130*35.2pcs spray guns, 400w servo motor for guns moving;750w for gun rack moving |
| Heating Elements | 2Set, 208-240V, Single Phase, 50 Hz, 2*4000W | 2 Sets, 208-240V, Single Phase, 50 Hz, 4000W*2 | |
| Water Recirculation System | 220V, Single Phase, 50 HZ, 750W | 208-240V, Single Phase, 50 HZ, 750W | |
Automatic Constant Temperature System
Equipped with 2 sets of 6000kw heating elements for fast heating and can keep the water temperature at 25-30℃.
Automatic Activator Spray System</strong
Equipped with 1 HVLP spray gun, you can adjust any size according to different films. And the spray is even, avoiding over-spraying or under-spraying.
Automatic Film Laying System
You can lay any length of film as needed, and it is very precise, which can save you film costs.
Automatic Dipping Arm
The mechanical arm replaces manual labor, which is very stable and precise; this will ensure the quality of water transfer printing.
Automatic Water Circle and Automatic Filtering System
With powerful flushing ability, it can immediately remove the remaining membrane dust to prepare for the next membrane placement, and circulate to the surface of the water tank to save water to the greatest extent. The filter, water pump, and heater are installed in different areas to ensure that the water is kept clean for a long time.
PLC Screen Operation
You can complete all the above settings and operations on the PLC screen, and you can operate it after only a short training.
Send Enquiry
Send Enquiry
