TSAUTOP Fully-automatic Water Transfer Printing Equipment For Mass Hydro Dipping
Production Line General Description
1) This Fully-automatic Water Transfer Printing Equipment Line inludes a tripod transfer machine, washing machine ,drying tunnel and paint cabinet;
2) Manual loading on the tripod: the parts are transferred to the transfer room through belt line transmission, which is equipped with automatic electrostatic dust removal device;
3) Film Flowing: The flow film is equipped with an electrostatic dust removal device to reduce the amount of residual static electricity on the surface of the film; the head can move back and forth in the chute to facilitate the adjustment of the soaking time of the film;
4) The method of transporting the film in the tank: the roller adds water to drive the film;
5) Water circulation in the water tank: a small cycle in the water tank, the membrane residue is filtered through six times of filtration, and the filtered water is circulated to the tail for heating, and the water flow is used to ensure the stability of the water temperature and reduce the production of waste water;
6) Spraying activator: The activator is sprayed by a single-axis reciprocating machine, and the side wall of the tank is equipped with exhaust to reduce the concentration and odor of VOCs in the operating area; the spray gun flow, fan shape, air pressure, atomization, etc. can be adjusted externally for easy operation;
7) Film residue filtration: 6-stage filtration;
8) The transfer chain spacing is 50-65cm, which is convenient to adjust the width;
9) The transfer adopts a tripod to automatically enter the water, and the water enters smoothly without shaking or shaking, ensuring that the lines are not deformed;
10) Washing: It is convenient to drain and supply water, the water can be recycled, and the pressure and density of water jets are reasonable;
11) Drying: stable operation, automatic constant temperature control, uniform temperature in the furnace, perfect heat insulation protection system, and energy saving;

TSAUTOP Fully-automatic Water Transfer Printing Equipment For Mass Hydro Dipping
1. Full stainless steel outlook in high quality;
2. Fully automatic operation to save man labour;
3. Easy installation with modern design;
4. Low-noise, strong-flow, and long-life stainless-steel water pump;
5. One machine, one person and one dipping industry.
Name | Fully-Automatic Tripod-transport Hydro Dipping Machine |
Part A | Continuous film flowing machine |
| Out size: 1000mm(W)*800mm(D)* 400mm(H) |
Part B | Single-axis reciprocating actiator spraying machine |
| Conveying motor: servo motor 0.4kw HF-KN43J-S100 |
Part C | Hydro dipping tank |
| (1) Outer Size: 9000mm(L)*1000mm(W)*900mm(H) |
| Tank body: T2.0 201# stainless steel plate tied and welded |
| Design speed: 900mm/min (0-3M/min) adjustable |
| Frequency conversion: GE Tech 1.5Kw 23v 1 PHASE |
| Circulating water pump: 1HP internal circulation |
Part D | Tripod Transport Device |
| size:3400mm(L)*300mm(W)*1220mm(H) |
| Angle adjustment: turbine angle regulator (finishing) |
| Triangle type: the upper and lower distance governor, the surface of the channel steel is sprayed with plastic; |
| Surface milky white spray treatment |
| Up and down lifter |
| Left and right angle adjuster |