Size: 0.5m/1m
Material: Premium PVA
Pattern: Skull, or Customizable
Recommend Base Coat Colors: White or Anything Light
Soaking Time: 60s
Water Temperature: 28-35℃
Activator: Recommended Tsautop Spray Activator
Application: Plastic, metal, ceramics, wood, stone, resin, etc.
Packaging: Sealed with PVC plastic and rolled on a tube to prevent moisture
Skull Hydro Dip Film is a creative, bold and avant-garde pattern design. Through the water transfer process, it gives your product a sense of mystery and art, reflecting its unique charm.
Product Features
Pattern Effect
Skull Hydro Dip Film uses high-quality PVA material to ensure that the pattern is clear, stable and durable. Printed by a high-precision printer, high resolution, realistic images and unparalleled details can meet your expectations. The advanced water immersion process allows the pattern to be seamlessly transferred during the application process, and it can remain uniform even on complex surface shapes.
Durable
The transferred Skull Hydro Dip Film has UV resistance, scratch resistance, aging resistance and other properties, and its service life can reach 5 to 15 years, which can protect the product surface and extend its service life.
Wide Application
Skull Hydro Dip Film can be applied to a variety of substrates, including plastics, fiberglass, wood, ceramics and metals, providing you with a wide range of application possibilities. Whether it is the modification of automotive parts, home decoration, or industrial manufacturing and sports equipment, this Skull Hydro Dip Film can meet your needs and provide more options for your project.
Use and Operation
The water transfer process is simple to operate and easy for novices to master without professional skills:
1. Make sure there is no stain on the surface of the product to ensure the transfer effect.
2. Spread the water transfer film on the water surface and soak for about 2 minutes.
3. Spray the activator and wait for the film to fully dissolve.
4. Immerse the product in water and attach the pattern seamlessly to the surface of the product through water pressure.
5. After taking out the product, rinse it with clean water and dry it or dry it.
7. Spray a layer of coating on the surface of the product to better protect the surface.
Maintenance and Care
The transferred product should avoid long-term exposure to harsh environments to avoid fading and falling off. It is recommended to use a mild detergent when cleaning to avoid damaging the surface.
| Pattern | Carbon Fiber, Skull, Camouflage ,Wooden, Marble& Stone, , Animal Skin, Cartoon, Royalty Pattern, Metal, flower, Designs |
| Technology | Water Transfer Printing |
| Printing Size | Small, Middle, Big, Super Large various sizes |
| LOGO | Silk-Screen, Water Dipping |
| Printing Shape | Round, Flat, Square, Irregular.curved surface |
| Certification | RoHS, FDA,SGS |
| Printing Material | Metal, Wood, Marble, ABS, PC, PP, PVC, PU, PE, TPU, EVA, PET, PBT, TPR, PPS, Kevlar fiber, Poly, Resin, Nylon, Silicone, Cement, Stone, Plastic, Glass etc. |
| Processing Type | Customer’s Specify pattern for Dipping |
| Brand | TSAUTOP |
| Feature | Environmentally friendly,Novelty |
| Our Customers | Building materials company, cosmetic company, Electrical company, Toy company, Auto company, crafts company, Household goods company etc. |
| MOQ | 1000PCS |
| Model Number | Customizable |
| Price | Confirm after printing samples |
| Market | Asia, China, Middle East, Europe, North America, south America, Africa |
| Packing | customizable, Carton |
Water Transfer Printing (also known as hydrographic, immersion printing, camo dipping, hydro imaging and cubic printing) is a surface decorating process where elaborate graphics like wood grain, carbon fiber, camouflage, geometrical designs, etc… are applied to a 3-D product surface. Water Transfer Printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim. Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramic, and metal.
We like to let our product speak for itself. Some of world largest clients are automobile, Camera, electronic manufacturers who demand highest standards of quality and durability. Many parts we manufacture spend the majority of their lives in direct exposure. The clear coat we use is automotive grade, designed to withstand nature and time.
Top coating is an important part of the paint process. It assures optimal results for scratching firmness and longevity.
Use a high quality clear coat for the final finish. Whether its flat, matt or gloss the final coat should be durable enough to protect the part. Once the clear coat has dried you need to inspect it for defects. Most minor defects like orange peel look, or debris in the finish can be wet sanded and polished out at this stage. There are a few exceptions to this.
24-hours of training is conducted and historically it takes an additional period of two to three weeks to fine-tune the production line.
The essential components are: (1). The ink film with selected design/pattern. (2). Patented activator (3). A hand sanding device (4). A spray gun and air compressor (5). Primer, the selected base coat paint, and clear coat (6). The specifically designed water transfer printing system (7). A device or fixture to hold the item while it is being dipped (8). A constant water supply, drainage system, and an aerated room
It require tanks (manual / automatic ) , washing station , oven, spray booth to finish the process of Water Transfer Printing .
Yes, after transfer with PVA film on the decorated part, it needs Washing machines to clear over the subject.
Yes, it better dry by the oven, it is because dust will cover the subject while it dry by nature, the oven temperature should be around 50-70 degrees for the plastic material.
We recommend 0.8~1.3Ømm , not over 1.3Ømm , for activator it require high quality Precisely spray gun to work with it.
We recommend adding more water tanks to soak the decorated part for ink to more stable on the decorated part.
Normally ABS doesn’t require any base coat, but to match the design, it has to paint the base color to match the art.
Yes , when you did the Immersion Printing, it comes with a defect spot or the result unacceptable, it can remove by the activator or the chemicals, but the fast way is to repaint the base coat to cover it.
We have Marble, Wood, Camouflage, Animal, Waterdrop, Flower, Flag , Cartoon, Carbon fiber, Flame, Cloud, Geometric, Skull and other design film patterns for your choice.
We produce hydrographic film with width 50cm /60cm/ 80cm/ 100cm/ 130cm.
Our standard film width is 100cm, max width 130cm.
Yes, but shipping and importing activator is very difficult, because it is dangerous, explosive,flammable chemical liquid. However, we prefer offering your activator formula, you can make activator by yourself in your country.
Yes, you can send us AI/PDF design, original film sample, or work piece that has been printed.
We are a 20-year WTP experience manufacturer in China.
Yes, We can produce and offer films, activator, base primer, clear coat, other chemicals, WTP machine, a hydro dipping process, technology, and training.
You can select film picture models from our dropbox,
or we send you film booklet ( N.W 15KG, 13x18cm each pattern, more than 10000 patterns).
Outdoor for more than 8 years, indoor more than 20years.
Yes, we have lots of customers all over the world such as Europe, Middle-east, Asia, North America and South America, Africa, include Building materials company, cosmetic company, Electrical company, Toy company, Auto company, crafts company, Household goods company etc.
Yes,Our company have 2 water transfer printing production lines in Zhejiang Province and can transfer various articles .let your China supplier send dipping products to our factory, we finish all processing.
T/T, Western Union, Cash, Alipay, Paypal. B/L
Animal Skin Hydrographic Film TSPW1208-1 
