Size: 0.5m/1m
Material: Premium PVA
Pattern: Camo, or Customizable
Soaking Time: 60s
Water Temperature: 28-35℃
Activator: Recommended Tsautop Spray Activator
Application: Plastic, metal, ceramics, wood, stone, resin, etc.
Packaging: Sealed with PVC plastic and rolled on a tube to prevent moisture
Camo Hydro Water Transfer Film uses abstract and casual pattern design, combined with high-quality materials and high-precision printing technology, to achieve high-definition and delicate patterns with rich layers. It is widely used in multiple fields, not limited to car modification, electronic equipment decoration, outdoor equipment, military equipment, etc., and can meet different personalized requirements.
Product Advantages
● High-quality materials: Camo Hydro Water Transfer Film uses high-quality PVA material, which has excellent stability and weather resistance, ensuring that the pattern is not easy to deform or break during the transfer process. Anti-UV ink can ensure that the color can be kept bright even in high temperature environment for a long time. At the same time, the material is environmentally friendly and non-toxic, meets national safety standards, and can be used with confidence.
● Strong durability: Camo Hydro Water Transfer Film has good wear resistance, scratch resistance and weather resistance, which can protect the product surface for a long time and extend the service life of the product.
● Wide applicability: Camo Hydro Water Transfer Film can be applied to different material surfaces, such as metal, plastic, glass, ceramic, etc., to meet the decoration needs of different products.
Application Scenarios
● Car modification: Add camouflage decoration to car body, wheel hub, fuel tank cap and other parts to enhance vehicle personalization and recognition.
● Outdoor equipment: Provide camouflage patterns for outdoor equipment such as water bottles and helmets to increase concealment and fashion sense.
● Electronic products: Provide camouflage decoration for electronic products such as mobile phone cases and game console controllers to show unique personality.
Operation Process
The water transfer process is simple to operate, and even novices can easily complete the transfer of patterns. It is very suitable for small-scale to large-scale production needs.
1. Clean the surface of the product to ensure that there are no stains, oil stains, etc. for better adhesion;
2. Soak the film in water for about 2 minutes to fully unfold it;
3. Spray the activator evenly and fully dissolve the film;
4. Put the product in water, and the pattern is attached to the surface of the product through water pressure;
5. Clean the excess film residue and dry it;
6. Spray a transparent coating to protect the surface of the product and improve durability.
Water Transfer Printing (also known as hydrographic, immersion printing, camo dipping, hydro imaging and cubic printing) is a surface decorating process where elaborate graphics like wood grain, carbon fiber, camouflage, geometrical designs, etc… are applied to a 3-D product surface. Water Transfer Printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim. Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramic, and metal.
We like to let our product speak for itself. Some of world largest clients are automobile, Camera, electronic manufacturers who demand highest standards of quality and durability. Many parts we manufacture spend the majority of their lives in direct exposure. The clear coat we use is automotive grade, designed to withstand nature and time.
Top coating is an important part of the paint process. It assures optimal results for scratching firmness and longevity.
Use a high quality clear coat for the final finish. Whether its flat, matt or gloss the final coat should be durable enough to protect the part. Once the clear coat has dried you need to inspect it for defects. Most minor defects like orange peel look, or debris in the finish can be wet sanded and polished out at this stage. There are a few exceptions to this.
24-hours of training is conducted and historically it takes an additional period of two to three weeks to fine-tune the production line.
The essential components are: (1). The ink film with selected design/pattern. (2). Patented activator (3). A hand sanding device (4). A spray gun and air compressor (5). Primer, the selected base coat paint, and clear coat (6). The specifically designed water transfer printing system (7). A device or fixture to hold the item while it is being dipped (8). A constant water supply, drainage system, and an aerated room
It require tanks (manual / automatic ) , washing station , oven, spray booth to finish the process of Water Transfer Printing .
Yes, after transfer with PVA film on the decorated part, it needs Washing machines to clear over the subject.
Yes, it better dry by the oven, it is because dust will cover the subject while it dry by nature, the oven temperature should be around 50-70 degrees for the plastic material.
We recommend 0.8~1.3Ømm , not over 1.3Ømm , for activator it require high quality Precisely spray gun to work with it.
We recommend adding more water tanks to soak the decorated part for ink to more stable on the decorated part.
Normally ABS doesn’t require any base coat, but to match the design, it has to paint the base color to match the art.
Yes , when you did the Immersion Printing, it comes with a defect spot or the result unacceptable, it can remove by the activator or the chemicals, but the fast way is to repaint the base coat to cover it.
We have Marble, Wood, Camouflage, Animal, Waterdrop, Flower, Flag , Cartoon, Carbon fiber, Flame, Cloud, Geometric, Skull and other design film patterns for your choice.
We produce hydrographic film with width 50cm /60cm/ 80cm/ 100cm/ 130cm.
Our standard film width is 100cm, max width 130cm.
Yes, but shipping and importing activator is very difficult, because it is dangerous, explosive,flammable chemical liquid. However, we prefer offering your activator formula, you can make activator by yourself in your country.
Yes, you can send us AI/PDF design, original film sample, or work piece that has been printed.
We are a 20-year WTP experience manufacturer in China.
Yes, We can produce and offer films, activator, base primer, clear coat, other chemicals, WTP machine, a hydro dipping process, technology, and training.
You can select film picture models from our dropbox,
or we send you film booklet ( N.W 15KG, 13x18cm each pattern, more than 10000 patterns).
Outdoor for more than 8 years, indoor more than 20years.
Yes, we have lots of customers all over the world such as Europe, Middle-east, Asia, North America and South America, Africa, include Building materials company, cosmetic company, Electrical company, Toy company, Auto company, crafts company, Household goods company etc.
Yes,Our company have 2 water transfer printing production lines in Zhejiang Province and can transfer various articles .let your China supplier send dipping products to our factory, we finish all processing.
T/T, Western Union, Cash, Alipay, Paypal. B/L
Camo Hydro Dip Film Designs TSMR80115 
