Fully Automatic Water Transfer Printing Machine

Fully Automatic Water Transfer Printing Machine

size(cm)Machine300*135*90 350*135*90 410*135*90
Dip Area200*110*70250*110*70310*110*70
Spary System130*35.   4 pcs 1.0mm HVLP spary guns
MaterialMachineThickness=2.5mm+-0.2mm 201#Stainless Steel
Dip Arm4*82mm thinckness aluminum alloy
PowerDip Armsingle /3 phases 220/380V 750W servo motor
Flow System130*50*30 ,  power signle /3 phases 220/380V 400w servo motor
Heat Elements2 set, 208-240V, single phase, 50HZ, 9000W
Water CircleStainless pump, 220V, single phase, 50HZ, 750WStainless pump, 208-240V, single phase, 50HZ,
750W
Gross WT800 KGS

automatic water transfer printing machine

TSAUTOP Fully Automatic Water Transfer Printing Machine version 2.0 is one of our equipment which are used for Fully automatic water transfer printing process.

This advanced Automatic Water Transfer Printing Machine has automatic constant temperature system, Automatic Activator Spray System, Automatic Film Flowing System, Automatic Dipping Arm, water circle, automatic filter film dust features. This hydro dipping equipment is pretty suitable for hydro dipping with few people.

One person can operate this machine to finish hydro dipping, so it can save your human labor. TSAUTOP Fully Automatic Water Transfer Printing Machine suit for the medium dipping factory owner.

This machine has two models, one key automatic mode and separated manual operation each system. Auto mode: this mode can continuously complete the whole dipping process including film flowing, activator spraying, dipping by robot arm and cleaning by auto key button. All size and speed can be set in PLC.

Manual mode: operating the water pump, flow-film system, activator spraying system, dipping separately. All size and speed can be set in PLC.

Automatic Water Transfer Printing Machine control box

This Automatic Water Transfer Printing Machine can complete one dipping process in 2.5minutes, so it is high-efficient. The flow-film system controlled by servo motor is very accurate; it will save you film cost.

The activator spraying system is integrated with the film flowing machine, it can save more time. It is fitted with 4 1.0mm caliber HVLP spray guns and can be adjusted to suitable for various film. 

Hvlp spray gun

The dipping arm powered by servo motor is very stable and precise; it can hang up 3 frames 200LBS objects. This ensures the quality of hydro dipping. It can did 500-5000pcs various objects.

Hydro DIPPING ARM

This Automatic Water Transfer Printing Machine have a one-click reset function. Although the machine stop any point, it can come back to the original position. And you can operate it again. This function will save much time for the hydro dipper. 

The heating function: 2sets 6000kw heating elements can start separately or all or not start, according to the weather hot or cold. The water temperature can set 25-35. 

Water circle and filtering, the water pump power is 750wit has strong flushing power and flushing over film dust will be filtered, instantly remove the remaining film dust, preparing for next putting film, and circle till surface of water tank for maximum saving the water.

All in one, One machine +One person =One factory.

 

1. Full stainless steel outlook in high quality;

2. Fully automatic operation to save human labor;

3. Easy installation with modern design;

4. Low-noise, strong-flow, and long-life stainless-steel water pump;

5. One machine, one person and one dipping industry.

Pin It on Pinterest

TSAUTOP