Automatic Hydro Dipping Equipment Drying Line

Automatic Hydro Dipping Equipment Drying Line

ParametersTSW-001/002/003       L*W*H
Machine Size1*7*1.4m/1.2*10*1.4m/1.3*12*1.4m
Drying Area0.85*5m/1.05*8m/1.15*10m
Temperature RangeRoom-200°C
Main PowerAC380V
Heating Power24kw/36kw/45kw
Overall Power27kw/40kw/50kw
ItemSize(Wide*Deep*High)specification
Dry oven machine (Single Door)1.3*0.8*2 m

4.27*2.62*6.56ft

(1)Automatic thermostat

(2)Temperature range: Room-150℃

(3)Main power: AC380V

(4)Heating power:12kw

(5)Wall thickness:80mm                                                                                    (6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7)The circulation system uses a motor to drive the wind impeller

Dry oven machine (Double Door)1.5*1*2 m                                             4.9*3.28*6.56ft(1)Automatic thermostat                                                                                  (2)Temperature range: Room-150℃

(3)Main power: AC380V

(4)Heating power:18kw                                                                                          (5)Wall thickness:80mm                                                                          (6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7)The circulation system uses a motor to drive the wind impeller

Dry oven machine (Double Door)1.8*1.6*2m                                          5.9*5.2*6.56ft(1)Automatic thermostat                                                                          (2)Temperature range: Room-150℃

(3)Main power: AC380V                                                                                    (4)Heating power:36kw                                                                                                (5)Wall thickness:80mm                                                                              (6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet
(7)The circulation system uses a motor to drive the wind impeller

Drying Tunnel1*7*2m                                          3.28*22.97*4.59 ft(1)Automatic thermostat                                                                            (2)Temperature range: Room-200℃                                                                  (3)Main power: AC380V                                                                                      (4)Heating power:24kw                                                                                              (5)Wall thickness:80mm                                                                                         (6)Galvanized sheet & Baking Paint

 

TSAUTOP Hydro Dipping Equipment Drying Oven and Dry Tunnel

We are making these with 4″ high-density mineral wool panels surrounded with 20ga galvanized steel to provide the best insulation possible with 3.15″ walls (this is not household insulation often used in lower quality ovens).  This model oven is powered by 220v, 60A single phase power, and the control box will need its own 110v power circuit.  It has three 4000-watt 48″ u-bend industrial heating elements made to aid in the circulation of heat providing more consistent temperatures throughout the oven.   Our industrial oven elements will also have a longer life that ovens using elements from a household oven.  All of our ovens have a 14ga galvanized floor to provide a smooth transition when using a rolling rack in your oven.

Our oven control box is designed to make it easier on the end user by using the auto tuning feature.  With this feature, all you have to do is hook up the power and turn the oven on and it will automatically set up the PID controller to provide the fastest warm-up times while keeping the temperature closer to your setting.  We also use solid state relays in all of our control boxes to eliminate moving parts that may fail, while also keeping the noise down from the operation of larger contact blocks.

(1)Automatic thermostat

(2)Temperature range: Room-150℃

(3)Main power: AC380V

(4)Heating power:12kw

(5)Wall thickness:80mm

(6)outside1.2mm cold rolling plate, inside 1.2mm Galvanized sheet

(7)The circulation system uses a motor to drive the wind impeller

Pin It on Pinterest