| Color: | meteal |
| Thickness: | Stainless Steel 201# T=2mm+-0.2mm |
| Size: | 1.3*0.7*0.8m |
| Durability: | more than 5 years |
| Stretch rate: | |
| Resistant: | |
| Adhesive: | |
| Certifiction: |
Feature: Hydrographic printing tank
water transfer printing tank
3d cubic printing machine
hydro dipping machine
Applications：hydro dipping shoes，hydro dipping guns,hydro dipped phone case,hydro dip tumbler, hydro dip air force 1, hydro dipping rims, hydro dipped guitar, hydro dipped cups, hydro dipped yeezys, hydro dipped wheels, hydro dipped glock, hydro dipping sneakers, hydro dipped water bottle, hydro dipping at home, hydro dipped airpods, hydro dip helmet, hydro dip motorcycle,hydro dipping car parts,hydro dipping hats, hydro dipping mugs, hydro dipping atv plastics, hydro dipping xbox one, hydro dipped ultra boost
Size | Outside Size | L: 1220mm X W:600mm X H:820mm |
Dipping Area | L: 850mm X W: 540mm X H: 300mm | |
Material | Stainless Steel | T=2.5mm+-0.2mm |
Main Components | Heating Elements | 220V, Single Phase, 50 HZ, 3KW |
Water Re-circulation System | Pump Power: 220V, Single Phase, 50 HZ, 30W | |
Control Panel | 1. Master Power On/Off Switch 2. Pump On/Off Switch 3. Heating Element On/Off Switch 4. Washing Start /Stop Switch 5. All the red and green lights needed for the switches. | |
Water Capacity | 0.16 Ton |
|
Package | Plywood case | |
Net WT | 50 KGS | |
Gross WT | 85 KGS | |
Package Size | L: 1300mm X W: 650mm X H: 500mm |
Water Transfer Tank
Water Transfer Printing (also known as hydrographic, immersion printing, camo dipping, hydro imaging and cubic printing) is a surface decorating process where elaborate graphics like wood grain, carbon fiber, camouflage, geometrical designs, etc… are applied to a 3-D product surface. Water Transfer Printing process is extensively used to decorate items that range from entire all-terrain vehicles and car dashboards to small items like bike helmets or other automotive trim. Films can be applied to all types of substrates including plastic, fiberglass, wood, ceramic, and metal.
We like to let our product speak for itself. Some of world largest clients are automobile, Camera, electronic manufacturers who demand highest standards of quality and durability. Many parts we manufacture spend the majority of their lives in direct exposure. The clear coat we use is automotive grade, designed to withstand nature and time.
Top coating is an important part of the paint process. It assures optimal results for scratching firmness and longevity.
Use a high quality clear coat for the final finish. Whether its flat, matt or gloss the final coat should be durable enough to protect the part. Once the clear coat has dried you need to inspect it for defects. Most minor defects like orange peel look, or debris in the finish can be wet sanded and polished out at this stage. There are a few exceptions to this.
24-hours of training is conducted and historically it takes an additional period of two to three weeks to fine-tune the production line.
The essential components are: (1). The ink film with selected design/pattern. (2). Patented activator (3). A hand sanding device (4). A spray gun and air compressor (5). Primer, the selected base coat paint, and clear coat (6). The specifically designed water transfer printing system (7). A device or fixture to hold the item while it is being dipped (8). A constant water supply, drainage system, and an aerated room
It require tanks (manual / automatic ) , washing station , oven, spray booth to finish the process of Water Transfer Printing .
Yes, after transfer with PVA film on the decorated part, it needs Washing machines to clear over the subject.
Yes, it better dry by the oven, it is because dust will cover the subject while it dry by nature, the oven temperature should be around 50-70 degrees for the plastic material.
We recommend 0.8~1.3Ømm , not over 1.3Ømm , for activator it require high quality Precisely spray gun to work with it.
We recommend adding more water tanks to soak the decorated part for ink to more stable on the decorated part.
Normally ABS doesn’t require any base coat, but to match the design, it has to paint the base color to match the art.
Yes , when you did the Immersion Printing, it comes with a defect spot or the result unacceptable, it can remove by the activator or the chemicals, but the fast way is to repaint the base coat to cover it.
We have Marble, Wood, Camouflage, Animal, Waterdrop, Flower, Flag , Cartoon, Carbon fiber, Flame, Cloud, Geometric, Skull and other design film patterns for your choice.
We produce hydrographic film with width 50cm /60cm/ 80cm/ 100cm/ 130cm.
Our standard film width is 100cm, max width 130cm.
Yes, but shipping and importing activator is very difficult, because it is dangerous, explosive,flammable chemical liquid. However, we prefer offering your activator formula, you can make activator by yourself in your country.
Yes, you can send us AI/PDF design, original film sample, or work piece that has been printed.
We are a 20-year WTP experience manufacturer in China.
Yes, We can produce and offer films, activator, base primer, clear coat, other chemicals, WTP machine, a hydro dipping process, technology, and training.
You can select film picture models from our dropbox,
or we send you film booklet ( N.W 15KG, 13x18cm each pattern, more than 10000 patterns).
Outdoor for more than 8 years, indoor more than 20years.
Yes, we have lots of customers all over the world such as Europe, Middle-east, Asia, North America and South America, Africa, include Building materials company, cosmetic company, Electrical company, Toy company, Auto company, crafts company, Household goods company etc.
Yes,Our company have 2 water transfer printing production lines in Zhejiang Province and can transfer various articles .let your China supplier send dipping products to our factory, we finish all processing.
T/T, Western Union, Cash, Alipay, Paypal. B/L
